A person fills a bathtub with hot water from a single faucet and settles into the bathtub to cleanse and relax. Unfortunately, the bathtub is not a spa-style tub with a secondary heating system and circulating jets, but rather a simple water containment vessel. After a while, the bath gets noticeably cooler, so the person adds a constant trickle of hot water from the faucet to reheat the bathing water. The bathtub is designed in such a way that when the tub reaches its capacity, excess water escapes through an overflow drain.
Develop a model of the temperature of the bathtub water in space and time to determine the best strategy the person in the bathtub can adopt to keep the temperature even throughout the bathtub and as close as possible to the initial temperature without wasting too much water.
Use your model to determine the extent to which your strategy depends upon the shape and volume of the tub, the shape/volume/temperature of the person in the bathtub, and the motions made by the person in the bathtub. If the person used a bubble bath additive while initially filling the bathtub to assist in cleansing, how would this affect your model’s results?
In addition to the required one-page summary for your MCM submission, your report must include a one-page non-technical explanation for users of the bathtub that describes your strategy while explaining why it is so difficult to get an evenly maintained temperature throughout the bath water.
The amount of small debris in orbit around earth has been a growing concern. It is estimated that more than 500,000 pieces of space debris, also called orbital debris, are currently being tracked as potential hazards to space craft. The issue itself became more widely discussed in the news media when the Russian satellite Kosmos-2251 and the USA satellite Iridium-33 collided on 10 February, 2009.
A number of methods to remove the debris have been proposed. These methods include small, space-based water jets and high energy lasers used to target specific pieces of debris and large satellites designed to sweep up the debris, among others. The debris ranges in size and mass from paint flakes to abandoned satellites. The debris’ high velocity orbits make capture difficult.
Develop a time-dependent model to determine the best alternative or combination of alternatives that a private firm could adopt as a commercial opportunity to address the space debris problem. Your model should include quantitative and/or qualitative estimates of costs, risks, benefits, as well as other important factors. Your model should be able to assess independent alternatives as well as combinations of alternatives and be able to explore a variety of important “What if?” scenarios.
Using your model, determine whether an economically attractive opportunity exists or no such opportunity is possible. If a viable commercial opportunity exists as an alternative solution, provide a comparison of the different options for removing debris, and include a specific recommendation as to how the debris should be removed. If no such opportunity is possible, then provide innovative alternatives for avoiding collisions.
In addition to the required one-page summary for your MCM submission, your report must include a two-page Executive Summary that describes the options considered and major modeling results, and provides a recommendation for a particular action, combination of actions, or no action, as appropriate from your work. The Executive Summary should be written for high level policy makers and news media analysts who do not have a technical background.